Burr proof receipt
This page shows the cached Burr release proof. The preview is visual context; the trust signal is the receipt checks and measured facts below.
fraylabs/burr@burr-v0.29.0
1 checks
These are the rules Burr rejected. A failed gallery example is useful only when this section is concrete.
actuator_mount:m3_bossed_mount_support_wall_thickness
Fastener support wall thickness is short by 0.7 mm.
Reason: insufficient_fastener_support_wall
Margin
-0.70 mm
Measured
Required
2 checks
These checks are tied to declared mechanical features, including STEP-presence and manufacturability facts where available.
actuator_mount:m3_clearance_hole_wall_thickness
Hole wall thickness passes rule.
Reason: ok
Margin
10.30 mm
Measured
Required
actuator_mount:m3_clearance_hole_step_presence
Declared clearance-hole geometry exists in the STEP artifact.
Reason: ok
Measured
Required
14 warnings
actuator_mount:m3_loaded_hole_edge_distance
No applicable features were found for this rule.
Reason: no_applicable_features
actuator_mount:mechanical_slot_edge_distance
No applicable features were found for this rule.
Reason: no_applicable_features
actuator_mount:counterbore_edge_distance
No applicable features were found for this rule.
Reason: no_applicable_features
actuator_mount:bearing_seat_edge_distance
No applicable features were found for this rule.
Reason: no_applicable_features
actuator_mount:m3_standoff_boss_edge_distance
No applicable features were found for this rule.
Reason: no_applicable_features
actuator_mount:heat_set_insert_pocket_edge_distance
No applicable features were found for this rule.
Reason: no_applicable_features
actuator_mount:m3_insert_support_wall_thickness
No applicable features were found for this rule.
Reason: no_applicable_features
actuator_mount:m3_insert_pocket_back_wall_thickness
No applicable features were found for this rule.
Reason: no_applicable_features
actuator_mount:straight_slot_step_presence
No applicable features were found for this rule.
Reason: no_applicable_features
actuator_mount:counterbore_step_presence
No applicable features were found for this rule.
Reason: no_applicable_features
actuator_mount:heat_set_insert_pocket_step_presence
No applicable features were found for this rule.
Reason: no_applicable_features
actuator_mount:bearing_seat_step_presence
No applicable features were found for this rule.
Reason: no_applicable_features
actuator_mount:m3_standoff_boss_step_presence
No applicable features were found for this rule.
Reason: no_applicable_features
actuator_mount:m3_standoff_boss_support_link
No applicable features were found for this rule.
Reason: no_applicable_features
8 checks
These checks prove the receipt was produced against known files and supported schemas.
burr_design_data:schema_version_supported
Design data schema version is supported.
Reason: ok
Measured
burr_rulepack:schema_version_supported
Rulepack schema version is supported.
Reason: ok
Measured
burr_design_data:source_file_exists
File ref path exists.
Reason: ok
burr_design_data:source_sha256_matches
File hash matches design data.
Reason: ok
Measured
Required
burr_design_data:source_file_exists
File ref path exists.
Reason: ok
burr_design_data:source_sha256_matches
File hash matches design data.
Reason: ok
Measured
Required
burr_design_data:artifact_file_exists
File ref path exists.
Reason: ok
burr_design_data:artifact_sha256_matches
File hash matches design data.
Reason: ok
Measured
Required