{
  "artifact_id": "build123d-actuator-housing-repair-bad",
  "artifact_type": "actuator_mount",
  "artifact_version": "0.1.0",
  "burr_version": "0.29.0",
  "checks": [
    {
      "measured": {
        "schema_version": "burr.design-data.v1"
      },
      "message": "Design data schema version is supported.",
      "reason": "ok",
      "rule_id": "burr_design_data:schema_version_supported",
      "status": "pass"
    },
    {
      "measured": {
        "schema_version": "burr.rulepack.v1"
      },
      "message": "Rulepack schema version is supported.",
      "reason": "ok",
      "rule_id": "burr_rulepack:schema_version_supported",
      "status": "pass"
    },
    {
      "file_ref": "source",
      "message": "File ref path exists.",
      "path": "design.py",
      "reason": "ok",
      "rule_id": "burr_design_data:source_file_exists",
      "status": "pass"
    },
    {
      "file_ref": "source",
      "measured": {
        "sha256": "39fbf182a35d96e1e4503c49e134e701c499a80382e248ce9695cf47b1cfa0a9"
      },
      "message": "File hash matches design data.",
      "path": "design.py",
      "reason": "ok",
      "required": {
        "sha256": "39fbf182a35d96e1e4503c49e134e701c499a80382e248ce9695cf47b1cfa0a9"
      },
      "rule_id": "burr_design_data:source_sha256_matches",
      "status": "pass"
    },
    {
      "file_ref": "sources[0]",
      "message": "File ref path exists.",
      "path": "design.py",
      "reason": "ok",
      "rule_id": "burr_design_data:source_file_exists",
      "status": "pass"
    },
    {
      "file_ref": "sources[0]",
      "measured": {
        "sha256": "39fbf182a35d96e1e4503c49e134e701c499a80382e248ce9695cf47b1cfa0a9"
      },
      "message": "File hash matches design data.",
      "path": "design.py",
      "reason": "ok",
      "required": {
        "sha256": "39fbf182a35d96e1e4503c49e134e701c499a80382e248ce9695cf47b1cfa0a9"
      },
      "rule_id": "burr_design_data:source_sha256_matches",
      "status": "pass"
    },
    {
      "file_ref": "artifacts[0]",
      "message": "File ref path exists.",
      "path": "actuator-housing.step",
      "reason": "ok",
      "rule_id": "burr_design_data:artifact_file_exists",
      "status": "pass"
    },
    {
      "file_ref": "artifacts[0]",
      "measured": {
        "sha256": "91f0ba3c82c7312be1e23158fd8ad645dc5950ec011f64267aefe2aa94ff1539"
      },
      "message": "File hash matches design data.",
      "path": "actuator-housing.step",
      "reason": "ok",
      "required": {
        "sha256": "91f0ba3c82c7312be1e23158fd8ad645dc5950ec011f64267aefe2aa94ff1539"
      },
      "rule_id": "burr_design_data:artifact_sha256_matches",
      "status": "pass"
    },
    {
      "feature_id": "m3_front_left",
      "margin_mm": -2.2,
      "measured": {
        "center_to_edge_mm": 8.0,
        "hole_diameter_mm": 3.4,
        "source": "parts[feature.part].bbox_mm nearest free edge",
        "wall_to_edge_mm": 6.3
      },
      "message": "Hole edge distance is short by 2.2 mm.",
      "reason": "insufficient_edge_distance",
      "required": {
        "center_to_edge_diameter_multiple": 3.0,
        "center_to_edge_mm": 10.2,
        "wall_to_edge_mm": 8.5
      },
      "rule_id": "actuator_mount:m3_loaded_hole_edge_distance",
      "status": "fail"
    },
    {
      "feature_id": "m3_front_right",
      "margin_mm": -2.2,
      "measured": {
        "center_to_edge_mm": 8.0,
        "hole_diameter_mm": 3.4,
        "source": "parts[feature.part].bbox_mm nearest free edge",
        "wall_to_edge_mm": 6.3
      },
      "message": "Hole edge distance is short by 2.2 mm.",
      "reason": "insufficient_edge_distance",
      "required": {
        "center_to_edge_diameter_multiple": 3.0,
        "center_to_edge_mm": 10.2,
        "wall_to_edge_mm": 8.5
      },
      "rule_id": "actuator_mount:m3_loaded_hole_edge_distance",
      "status": "fail"
    },
    {
      "feature_id": "m3_rear_left",
      "margin_mm": -2.2,
      "measured": {
        "center_to_edge_mm": 8.0,
        "hole_diameter_mm": 3.4,
        "source": "parts[feature.part].bbox_mm nearest free edge",
        "wall_to_edge_mm": 6.3
      },
      "message": "Hole edge distance is short by 2.2 mm.",
      "reason": "insufficient_edge_distance",
      "required": {
        "center_to_edge_diameter_multiple": 3.0,
        "center_to_edge_mm": 10.2,
        "wall_to_edge_mm": 8.5
      },
      "rule_id": "actuator_mount:m3_loaded_hole_edge_distance",
      "status": "fail"
    },
    {
      "feature_id": "m3_rear_right",
      "margin_mm": -2.2,
      "measured": {
        "center_to_edge_mm": 8.0,
        "hole_diameter_mm": 3.4,
        "source": "parts[feature.part].bbox_mm nearest free edge",
        "wall_to_edge_mm": 6.3
      },
      "message": "Hole edge distance is short by 2.2 mm.",
      "reason": "insufficient_edge_distance",
      "required": {
        "center_to_edge_diameter_multiple": 3.0,
        "center_to_edge_mm": 10.2,
        "wall_to_edge_mm": 8.5
      },
      "rule_id": "actuator_mount:m3_loaded_hole_edge_distance",
      "status": "fail"
    },
    {
      "feature_id": "m3_front_left",
      "margin_mm": 4.3,
      "measured": {
        "center_to_edge_mm": 8.0,
        "hole_diameter_mm": 3.4,
        "source": "parts[feature.part].bbox_mm nearest free edge",
        "wall_thickness_mm": 6.3
      },
      "message": "Hole wall thickness passes rule.",
      "reason": "ok",
      "required": {
        "wall_thickness_mm": 2.0
      },
      "rule_id": "actuator_mount:m3_clearance_hole_wall_thickness",
      "status": "pass"
    },
    {
      "feature_id": "m3_front_right",
      "margin_mm": 4.3,
      "measured": {
        "center_to_edge_mm": 8.0,
        "hole_diameter_mm": 3.4,
        "source": "parts[feature.part].bbox_mm nearest free edge",
        "wall_thickness_mm": 6.3
      },
      "message": "Hole wall thickness passes rule.",
      "reason": "ok",
      "required": {
        "wall_thickness_mm": 2.0
      },
      "rule_id": "actuator_mount:m3_clearance_hole_wall_thickness",
      "status": "pass"
    },
    {
      "feature_id": "m3_rear_left",
      "margin_mm": 4.3,
      "measured": {
        "center_to_edge_mm": 8.0,
        "hole_diameter_mm": 3.4,
        "source": "parts[feature.part].bbox_mm nearest free edge",
        "wall_thickness_mm": 6.3
      },
      "message": "Hole wall thickness passes rule.",
      "reason": "ok",
      "required": {
        "wall_thickness_mm": 2.0
      },
      "rule_id": "actuator_mount:m3_clearance_hole_wall_thickness",
      "status": "pass"
    },
    {
      "feature_id": "m3_rear_right",
      "margin_mm": 4.3,
      "measured": {
        "center_to_edge_mm": 8.0,
        "hole_diameter_mm": 3.4,
        "source": "parts[feature.part].bbox_mm nearest free edge",
        "wall_thickness_mm": 6.3
      },
      "message": "Hole wall thickness passes rule.",
      "reason": "ok",
      "required": {
        "wall_thickness_mm": 2.0
      },
      "rule_id": "actuator_mount:m3_clearance_hole_wall_thickness",
      "status": "pass"
    },
    {
      "feature_id": "m3_front_left",
      "measured": {
        "artifact_path": "actuator-housing.step",
        "axis_dot": 1.0,
        "candidate_cylinders": 4,
        "centerline_distance_mm": 0.0,
        "diameter_delta_mm": 0.0
      },
      "message": "Declared clearance-hole geometry exists in the STEP artifact.",
      "reason": "ok",
      "required": {
        "axis_dot_min": 0.99,
        "centerline_tolerance_mm": 0.25,
        "diameter_tolerance_mm": 0.05
      },
      "rule_id": "actuator_mount:m3_clearance_hole_step_presence",
      "status": "pass"
    },
    {
      "feature_id": "m3_front_right",
      "measured": {
        "artifact_path": "actuator-housing.step",
        "axis_dot": 1.0,
        "candidate_cylinders": 4,
        "centerline_distance_mm": 0.0,
        "diameter_delta_mm": 0.0
      },
      "message": "Declared clearance-hole geometry exists in the STEP artifact.",
      "reason": "ok",
      "required": {
        "axis_dot_min": 0.99,
        "centerline_tolerance_mm": 0.25,
        "diameter_tolerance_mm": 0.05
      },
      "rule_id": "actuator_mount:m3_clearance_hole_step_presence",
      "status": "pass"
    },
    {
      "feature_id": "m3_rear_left",
      "measured": {
        "artifact_path": "actuator-housing.step",
        "axis_dot": 1.0,
        "candidate_cylinders": 4,
        "centerline_distance_mm": 0.0,
        "diameter_delta_mm": 0.0
      },
      "message": "Declared clearance-hole geometry exists in the STEP artifact.",
      "reason": "ok",
      "required": {
        "axis_dot_min": 0.99,
        "centerline_tolerance_mm": 0.25,
        "diameter_tolerance_mm": 0.05
      },
      "rule_id": "actuator_mount:m3_clearance_hole_step_presence",
      "status": "pass"
    },
    {
      "feature_id": "m3_rear_right",
      "measured": {
        "artifact_path": "actuator-housing.step",
        "axis_dot": 1.0,
        "candidate_cylinders": 4,
        "centerline_distance_mm": 0.0,
        "diameter_delta_mm": 0.0
      },
      "message": "Declared clearance-hole geometry exists in the STEP artifact.",
      "reason": "ok",
      "required": {
        "axis_dot_min": 0.99,
        "centerline_tolerance_mm": 0.25,
        "diameter_tolerance_mm": 0.05
      },
      "rule_id": "actuator_mount:m3_clearance_hole_step_presence",
      "status": "pass"
    }
  ],
  "compatibility": {
    "design_data_schema_version": "burr.design-data.v1",
    "manifest_schema_version": "burr.design-data.v1",
    "rulepack_schema_version": "burr.rulepack.v1",
    "supported_design_data_schema_versions": [
      "burr.design-data.v1",
      "fray.cad.artifact.v1"
    ],
    "supported_manifest_schema_versions": [
      "burr.design-data.v1",
      "fray.cad.artifact.v1"
    ],
    "supported_rulepack_schema_versions": [
      "burr.rulepack.v1"
    ]
  },
  "rulepack_id": "actuator_mount",
  "rulepack_version": "0.14.0",
  "schema_version": "burr.receipt.v1",
  "source_design_data": "examples/build123d-actuator-housing-repair/bad/burr-design-data.json",
  "source_manifest": "examples/build123d-actuator-housing-repair/bad/burr-design-data.json",
  "status": "fail",
  "summary": {
    "checks": 20,
    "failures": 4,
    "features": {
      "checked": 4,
      "checked_feature_ids": [
        "m3_front_left",
        "m3_front_right",
        "m3_rear_left",
        "m3_rear_right"
      ],
      "declared": 4,
      "intent_counts": {
        "mechanical_interface": 4
      },
      "step_candidate_cylinders_considered": 4,
      "unchecked": 0,
      "unchecked_feature_ids": []
    },
    "warnings": 14
  },
  "warnings": [
    {
      "message": "No applicable features were found for this rule.",
      "reason": "no_applicable_features",
      "rule_id": "actuator_mount:mechanical_slot_edge_distance",
      "status": "warn"
    },
    {
      "message": "No applicable features were found for this rule.",
      "reason": "no_applicable_features",
      "rule_id": "actuator_mount:counterbore_edge_distance",
      "status": "warn"
    },
    {
      "message": "No applicable features were found for this rule.",
      "reason": "no_applicable_features",
      "rule_id": "actuator_mount:bearing_seat_edge_distance",
      "status": "warn"
    },
    {
      "message": "No applicable features were found for this rule.",
      "reason": "no_applicable_features",
      "rule_id": "actuator_mount:m3_standoff_boss_edge_distance",
      "status": "warn"
    },
    {
      "message": "No applicable features were found for this rule.",
      "reason": "no_applicable_features",
      "rule_id": "actuator_mount:heat_set_insert_pocket_edge_distance",
      "status": "warn"
    },
    {
      "message": "No applicable features were found for this rule.",
      "reason": "no_applicable_features",
      "rule_id": "actuator_mount:m3_bossed_mount_support_wall_thickness",
      "status": "warn"
    },
    {
      "message": "No applicable features were found for this rule.",
      "reason": "no_applicable_features",
      "rule_id": "actuator_mount:m3_insert_support_wall_thickness",
      "status": "warn"
    },
    {
      "message": "No applicable features were found for this rule.",
      "reason": "no_applicable_features",
      "rule_id": "actuator_mount:m3_insert_pocket_back_wall_thickness",
      "status": "warn"
    },
    {
      "message": "No applicable features were found for this rule.",
      "reason": "no_applicable_features",
      "rule_id": "actuator_mount:straight_slot_step_presence",
      "status": "warn"
    },
    {
      "message": "No applicable features were found for this rule.",
      "reason": "no_applicable_features",
      "rule_id": "actuator_mount:counterbore_step_presence",
      "status": "warn"
    },
    {
      "message": "No applicable features were found for this rule.",
      "reason": "no_applicable_features",
      "rule_id": "actuator_mount:heat_set_insert_pocket_step_presence",
      "status": "warn"
    },
    {
      "message": "No applicable features were found for this rule.",
      "reason": "no_applicable_features",
      "rule_id": "actuator_mount:bearing_seat_step_presence",
      "status": "warn"
    },
    {
      "message": "No applicable features were found for this rule.",
      "reason": "no_applicable_features",
      "rule_id": "actuator_mount:m3_standoff_boss_step_presence",
      "status": "warn"
    },
    {
      "message": "No applicable features were found for this rule.",
      "reason": "no_applicable_features",
      "rule_id": "actuator_mount:m3_standoff_boss_support_link",
      "status": "warn"
    }
  ]
}