{
  "artifact_id": "build123d-standoff-boss-edge-good",
  "artifact_type": "actuator_mount",
  "artifact_version": "0.1.0",
  "burr_version": "0.29.0",
  "checks": [
    {
      "measured": {
        "schema_version": "burr.design-data.v1"
      },
      "message": "Design data schema version is supported.",
      "reason": "ok",
      "rule_id": "burr_design_data:schema_version_supported",
      "status": "pass"
    },
    {
      "measured": {
        "schema_version": "burr.rulepack.v1"
      },
      "message": "Rulepack schema version is supported.",
      "reason": "ok",
      "rule_id": "burr_rulepack:schema_version_supported",
      "status": "pass"
    },
    {
      "file_ref": "source",
      "message": "File ref path exists.",
      "path": "design.py",
      "reason": "ok",
      "rule_id": "burr_design_data:source_file_exists",
      "status": "pass"
    },
    {
      "file_ref": "source",
      "measured": {
        "sha256": "11cdf704b934e54ee2ece5a10f7fd56cf48dbde4ec37fd8b89c455b7106ec2d3"
      },
      "message": "File hash matches design data.",
      "path": "design.py",
      "reason": "ok",
      "required": {
        "sha256": "11cdf704b934e54ee2ece5a10f7fd56cf48dbde4ec37fd8b89c455b7106ec2d3"
      },
      "rule_id": "burr_design_data:source_sha256_matches",
      "status": "pass"
    },
    {
      "file_ref": "sources[0]",
      "message": "File ref path exists.",
      "path": "design.py",
      "reason": "ok",
      "rule_id": "burr_design_data:source_file_exists",
      "status": "pass"
    },
    {
      "file_ref": "sources[0]",
      "measured": {
        "sha256": "11cdf704b934e54ee2ece5a10f7fd56cf48dbde4ec37fd8b89c455b7106ec2d3"
      },
      "message": "File hash matches design data.",
      "path": "design.py",
      "reason": "ok",
      "required": {
        "sha256": "11cdf704b934e54ee2ece5a10f7fd56cf48dbde4ec37fd8b89c455b7106ec2d3"
      },
      "rule_id": "burr_design_data:source_sha256_matches",
      "status": "pass"
    },
    {
      "file_ref": "artifacts[0]",
      "message": "File ref path exists.",
      "path": "standoff-boss-edge.step",
      "reason": "ok",
      "rule_id": "burr_design_data:artifact_file_exists",
      "status": "pass"
    },
    {
      "file_ref": "artifacts[0]",
      "measured": {
        "sha256": "de305365537b600dee5acb78e16f6665b6f0c20535f637e18b7e15fa786075fa"
      },
      "message": "File hash matches design data.",
      "path": "standoff-boss-edge.step",
      "reason": "ok",
      "required": {
        "sha256": "de305365537b600dee5acb78e16f6665b6f0c20535f637e18b7e15fa786075fa"
      },
      "rule_id": "burr_design_data:artifact_sha256_matches",
      "status": "pass"
    },
    {
      "feature_id": "m3_bossed_mount",
      "margin_mm": 12.3,
      "measured": {
        "center_to_edge_mm": 16.0,
        "hole_diameter_mm": 3.4,
        "source": "parts[feature.part].bbox_mm nearest free edge",
        "wall_thickness_mm": 14.3
      },
      "message": "Hole wall thickness passes rule.",
      "reason": "ok",
      "required": {
        "wall_thickness_mm": 2.0
      },
      "rule_id": "actuator_mount:m3_clearance_hole_wall_thickness",
      "status": "pass"
    },
    {
      "feature_id": "m3_standoff_boss",
      "margin_mm": 9.0,
      "measured": {
        "closest_edge": {
          "axis": "y",
          "side": "min"
        },
        "feature_shape": "circle",
        "source": "parts[feature.part].bbox_mm minus feature envelope",
        "wall_to_edge_mm": 12.0
      },
      "message": "Feature edge distance passes rule.",
      "reason": "ok",
      "required": {
        "center_field": "boss_center_mm",
        "diameter_field": "boss_diameter_mm",
        "length_field": "length_mm",
        "min_wall_to_edge_mm": 3.0,
        "span_axis_field": "span_axis",
        "width_field": "width_mm"
      },
      "rule_id": "actuator_mount:m3_standoff_boss_edge_distance",
      "status": "pass"
    },
    {
      "feature_id": "m3_bossed_mount",
      "margin_mm": 0.3,
      "measured": {
        "inner_diameter_mm": 3.4,
        "support_diameter_mm": 8.0,
        "support_wall_thickness_mm": 2.3
      },
      "message": "Fastener support wall thickness passes rule.",
      "reason": "ok",
      "required": {
        "wall_thickness_mm": 2.0
      },
      "rule_id": "actuator_mount:m3_bossed_mount_support_wall_thickness",
      "status": "pass"
    },
    {
      "feature_id": "m3_bossed_mount",
      "measured": {
        "artifact_path": "standoff-boss-edge.step",
        "axis_dot": 1.0,
        "candidate_cylinders": 2,
        "centerline_distance_mm": 0.0,
        "diameter_delta_mm": 0.0
      },
      "message": "Declared clearance-hole geometry exists in the STEP artifact.",
      "reason": "ok",
      "required": {
        "axis_dot_min": 0.99,
        "centerline_tolerance_mm": 0.25,
        "diameter_tolerance_mm": 0.05
      },
      "rule_id": "actuator_mount:m3_clearance_hole_step_presence",
      "status": "pass"
    },
    {
      "feature_id": "m3_standoff_boss",
      "measured": {
        "artifact_path": "standoff-boss-edge.step",
        "best_boss_axial_distance_mm": 2.5,
        "best_boss_axis_dot": 1.0,
        "best_boss_centerline_distance_mm": 0.0,
        "best_boss_diameter_delta_mm": 0.0,
        "best_top_plane_distance_mm": 0.0,
        "best_top_plane_normal_dot": 1.0,
        "candidate_cylinders": 2,
        "candidate_planes": 8,
        "matched_boss_cylinder": true,
        "matched_boss_top_plane": true
      },
      "message": "Declared standoff boss cylinder and top-plane geometry exists in the STEP artifact.",
      "reason": "ok",
      "required": {
        "axis": [
          0.0,
          0.0,
          1.0
        ],
        "axis_dot_min": 0.99,
        "boss_axial_tolerance_mm": 3.0,
        "boss_center_mm": [
          0.0,
          0.0,
          6.5
        ],
        "boss_center_tolerance_mm": 0.5,
        "boss_diameter_mm": 8.0,
        "boss_diameter_tolerance_mm": 0.05,
        "boss_height_mm": 5.0,
        "centerline_tolerance_mm": 0.25,
        "top_center_mm": [
          0.0,
          0.0,
          9.0
        ],
        "top_plane_tolerance_mm": 0.25
      },
      "rule_id": "actuator_mount:m3_standoff_boss_step_presence",
      "status": "pass"
    },
    {
      "feature_id": "m3_standoff_boss",
      "margin_mm": 0.25,
      "measured": {
        "axis_dot": 1.0,
        "boss_diameter_mm": 8.0,
        "centerline_distance_mm": 0.0,
        "support_diameter_delta_mm": 0.0,
        "supported_feature_id": "m3_bossed_mount",
        "supported_feature_kind": "clearance_hole",
        "supported_support_diameter_mm": 8.0
      },
      "message": "Standoff boss is aligned with the feature it supports.",
      "reason": "ok",
      "related_feature_id": "m3_bossed_mount",
      "repair": {
        "action": "align_standoff_boss_to_supported_feature",
        "related_feature_id": "m3_bossed_mount",
        "target_feature_id": "m3_standoff_boss",
        "value_paths": [
          "features[id=m3_standoff_boss].center_mm",
          "features[id=m3_standoff_boss].boss_center_mm",
          "features[id=m3_standoff_boss].top_center_mm"
        ]
      },
      "required": {
        "axis_dot_min": 0.99,
        "centerline_tolerance_mm": 0.25,
        "support_diameter_tolerance_mm": 0.05
      },
      "rule_id": "actuator_mount:m3_standoff_boss_support_link",
      "status": "pass"
    }
  ],
  "compatibility": {
    "design_data_schema_version": "burr.design-data.v1",
    "manifest_schema_version": "burr.design-data.v1",
    "rulepack_schema_version": "burr.rulepack.v1",
    "supported_design_data_schema_versions": [
      "burr.design-data.v1",
      "fray.cad.artifact.v1"
    ],
    "supported_manifest_schema_versions": [
      "burr.design-data.v1",
      "fray.cad.artifact.v1"
    ],
    "supported_rulepack_schema_versions": [
      "burr.rulepack.v1"
    ]
  },
  "rulepack_id": "actuator_mount",
  "rulepack_version": "0.14.0",
  "schema_version": "burr.receipt.v1",
  "source_design_data": "examples/build123d-standoff-boss-edge-distance/good/burr-design-data.json",
  "source_manifest": "examples/build123d-standoff-boss-edge-distance/good/burr-design-data.json",
  "status": "pass",
  "summary": {
    "checks": 14,
    "failures": 0,
    "features": {
      "checked": 2,
      "checked_feature_ids": [
        "m3_standoff_boss",
        "m3_bossed_mount"
      ],
      "declared": 2,
      "intent_counts": {
        "mechanical_interface": 2
      },
      "step_candidate_cylinders_considered": 2,
      "unchecked": 0,
      "unchecked_feature_ids": []
    },
    "warnings": 11
  },
  "warnings": [
    {
      "message": "No applicable features were found for this rule.",
      "reason": "no_applicable_features",
      "rule_id": "actuator_mount:m3_loaded_hole_edge_distance",
      "status": "warn"
    },
    {
      "message": "No applicable features were found for this rule.",
      "reason": "no_applicable_features",
      "rule_id": "actuator_mount:mechanical_slot_edge_distance",
      "status": "warn"
    },
    {
      "message": "No applicable features were found for this rule.",
      "reason": "no_applicable_features",
      "rule_id": "actuator_mount:counterbore_edge_distance",
      "status": "warn"
    },
    {
      "message": "No applicable features were found for this rule.",
      "reason": "no_applicable_features",
      "rule_id": "actuator_mount:bearing_seat_edge_distance",
      "status": "warn"
    },
    {
      "message": "No applicable features were found for this rule.",
      "reason": "no_applicable_features",
      "rule_id": "actuator_mount:heat_set_insert_pocket_edge_distance",
      "status": "warn"
    },
    {
      "message": "No applicable features were found for this rule.",
      "reason": "no_applicable_features",
      "rule_id": "actuator_mount:m3_insert_support_wall_thickness",
      "status": "warn"
    },
    {
      "message": "No applicable features were found for this rule.",
      "reason": "no_applicable_features",
      "rule_id": "actuator_mount:m3_insert_pocket_back_wall_thickness",
      "status": "warn"
    },
    {
      "message": "No applicable features were found for this rule.",
      "reason": "no_applicable_features",
      "rule_id": "actuator_mount:straight_slot_step_presence",
      "status": "warn"
    },
    {
      "message": "No applicable features were found for this rule.",
      "reason": "no_applicable_features",
      "rule_id": "actuator_mount:counterbore_step_presence",
      "status": "warn"
    },
    {
      "message": "No applicable features were found for this rule.",
      "reason": "no_applicable_features",
      "rule_id": "actuator_mount:heat_set_insert_pocket_step_presence",
      "status": "warn"
    },
    {
      "message": "No applicable features were found for this rule.",
      "reason": "no_applicable_features",
      "rule_id": "actuator_mount:bearing_seat_step_presence",
      "status": "warn"
    }
  ]
}