{
  "artifact_id": "gallery-shaft-bearing-bracket",
  "artifact_type": "actuator_mount",
  "artifact_version": "0.1.0",
  "burr_version": "0.29.0",
  "checks": [
    {
      "measured": {
        "schema_version": "burr.design-data.v1"
      },
      "message": "Design data schema version is supported.",
      "reason": "ok",
      "rule_id": "burr_design_data:schema_version_supported",
      "status": "pass"
    },
    {
      "measured": {
        "schema_version": "burr.rulepack.v1"
      },
      "message": "Rulepack schema version is supported.",
      "reason": "ok",
      "rule_id": "burr_rulepack:schema_version_supported",
      "status": "pass"
    },
    {
      "file_ref": "source",
      "message": "File ref path exists.",
      "path": "design.py",
      "reason": "ok",
      "rule_id": "burr_design_data:source_file_exists",
      "status": "pass"
    },
    {
      "file_ref": "source",
      "measured": {
        "sha256": "769530a54e6a4e0f22c2e67608fe1303cbbc320691c3956d52365b741235209a"
      },
      "message": "File hash matches design data.",
      "path": "design.py",
      "reason": "ok",
      "required": {
        "sha256": "769530a54e6a4e0f22c2e67608fe1303cbbc320691c3956d52365b741235209a"
      },
      "rule_id": "burr_design_data:source_sha256_matches",
      "status": "pass"
    },
    {
      "file_ref": "sources[0]",
      "message": "File ref path exists.",
      "path": "design.py",
      "reason": "ok",
      "rule_id": "burr_design_data:source_file_exists",
      "status": "pass"
    },
    {
      "file_ref": "sources[0]",
      "measured": {
        "sha256": "769530a54e6a4e0f22c2e67608fe1303cbbc320691c3956d52365b741235209a"
      },
      "message": "File hash matches design data.",
      "path": "design.py",
      "reason": "ok",
      "required": {
        "sha256": "769530a54e6a4e0f22c2e67608fe1303cbbc320691c3956d52365b741235209a"
      },
      "rule_id": "burr_design_data:source_sha256_matches",
      "status": "pass"
    },
    {
      "file_ref": "artifacts[0]",
      "message": "File ref path exists.",
      "path": "shaft-bearing-bracket.step",
      "reason": "ok",
      "rule_id": "burr_design_data:artifact_file_exists",
      "status": "pass"
    },
    {
      "file_ref": "artifacts[0]",
      "measured": {
        "sha256": "db1f359dbad09f4ca03b6208fadb17f7a863179473f323ea8db9a8595d05bf96"
      },
      "message": "File hash matches design data.",
      "path": "shaft-bearing-bracket.step",
      "reason": "ok",
      "required": {
        "sha256": "db1f359dbad09f4ca03b6208fadb17f7a863179473f323ea8db9a8595d05bf96"
      },
      "rule_id": "burr_design_data:artifact_sha256_matches",
      "status": "pass"
    },
    {
      "feature_id": "m3_loaded_mount_left",
      "margin_mm": 0.8,
      "measured": {
        "center_to_edge_mm": 11.0,
        "hole_diameter_mm": 3.4,
        "source": "parts[feature.part].bbox_mm nearest free edge",
        "wall_to_edge_mm": 9.3
      },
      "message": "Hole edge distance passes rule.",
      "reason": "ok",
      "required": {
        "center_to_edge_diameter_multiple": 3.0,
        "center_to_edge_mm": 10.2,
        "wall_to_edge_mm": 8.5
      },
      "rule_id": "actuator_mount:m3_loaded_hole_edge_distance",
      "status": "pass"
    },
    {
      "feature_id": "m3_loaded_mount_right",
      "margin_mm": 0.8,
      "measured": {
        "center_to_edge_mm": 11.0,
        "hole_diameter_mm": 3.4,
        "source": "parts[feature.part].bbox_mm nearest free edge",
        "wall_to_edge_mm": 9.3
      },
      "message": "Hole edge distance passes rule.",
      "reason": "ok",
      "required": {
        "center_to_edge_diameter_multiple": 3.0,
        "center_to_edge_mm": 10.2,
        "wall_to_edge_mm": 8.5
      },
      "rule_id": "actuator_mount:m3_loaded_hole_edge_distance",
      "status": "pass"
    },
    {
      "feature_id": "m3_loaded_mount_left",
      "margin_mm": 7.3,
      "measured": {
        "center_to_edge_mm": 11.0,
        "hole_diameter_mm": 3.4,
        "source": "parts[feature.part].bbox_mm nearest free edge",
        "wall_thickness_mm": 9.3
      },
      "message": "Hole wall thickness passes rule.",
      "reason": "ok",
      "required": {
        "wall_thickness_mm": 2.0
      },
      "rule_id": "actuator_mount:m3_clearance_hole_wall_thickness",
      "status": "pass"
    },
    {
      "feature_id": "m3_loaded_mount_right",
      "margin_mm": 7.3,
      "measured": {
        "center_to_edge_mm": 11.0,
        "hole_diameter_mm": 3.4,
        "source": "parts[feature.part].bbox_mm nearest free edge",
        "wall_thickness_mm": 9.3
      },
      "message": "Hole wall thickness passes rule.",
      "reason": "ok",
      "required": {
        "wall_thickness_mm": 2.0
      },
      "rule_id": "actuator_mount:m3_clearance_hole_wall_thickness",
      "status": "pass"
    },
    {
      "feature_id": "m3_loaded_mount_left",
      "measured": {
        "artifact_path": "shaft-bearing-bracket.step",
        "axis_dot": 1.0,
        "candidate_cylinders": 5,
        "centerline_distance_mm": 0.0,
        "diameter_delta_mm": 0.0
      },
      "message": "Declared clearance-hole geometry exists in the STEP artifact.",
      "reason": "ok",
      "required": {
        "axis_dot_min": 0.99,
        "centerline_tolerance_mm": 0.25,
        "diameter_tolerance_mm": 0.05
      },
      "rule_id": "actuator_mount:m3_clearance_hole_step_presence",
      "status": "pass"
    },
    {
      "feature_id": "m3_loaded_mount_right",
      "measured": {
        "artifact_path": "shaft-bearing-bracket.step",
        "axis_dot": 1.0,
        "candidate_cylinders": 5,
        "centerline_distance_mm": 0.0,
        "diameter_delta_mm": 0.0
      },
      "message": "Declared clearance-hole geometry exists in the STEP artifact.",
      "reason": "ok",
      "required": {
        "axis_dot_min": 0.99,
        "centerline_tolerance_mm": 0.25,
        "diameter_tolerance_mm": 0.05
      },
      "rule_id": "actuator_mount:m3_clearance_hole_step_presence",
      "status": "pass"
    },
    {
      "feature_id": "bearing_608_primary",
      "measured": {
        "artifact_path": "shaft-bearing-bracket.step",
        "best_seat_axial_distance_mm": 3.5,
        "best_seat_axis_dot": 1.0,
        "best_seat_centerline_distance_mm": 0.0,
        "best_seat_diameter_delta_mm": 0.0,
        "best_shoulder_plane_distance_mm": 0.0,
        "best_shoulder_plane_normal_dot": 1.0,
        "candidate_cylinders": 5,
        "candidate_planes": 8,
        "matched_seat_cylinder": true,
        "matched_seat_shoulder_plane": true
      },
      "message": "Declared bearing seat cylinder and shoulder-plane geometry exists in the STEP artifact.",
      "reason": "ok",
      "required": {
        "axis": [
          1.0,
          0.0,
          0.0
        ],
        "axis_dot_min": 0.99,
        "center_mm": [
          0.0,
          0.0,
          0.0
        ],
        "centerline_tolerance_mm": 0.25,
        "seat_axial_tolerance_mm": 4.0,
        "seat_center_mm": [
          -7.5,
          0.0,
          0.0
        ],
        "seat_center_tolerance_mm": 0.5,
        "seat_depth_mm": 7.0,
        "seat_diameter_mm": 22.0,
        "seat_diameter_tolerance_mm": 0.05,
        "shoulder_center_mm": [
          -4.0,
          0.0,
          0.0
        ],
        "shoulder_plane_tolerance_mm": 0.25
      },
      "rule_id": "actuator_mount:bearing_seat_step_presence",
      "status": "pass"
    }
  ],
  "compatibility": {
    "design_data_schema_version": "burr.design-data.v1",
    "manifest_schema_version": "burr.design-data.v1",
    "rulepack_schema_version": "burr.rulepack.v1",
    "supported_design_data_schema_versions": [
      "burr.design-data.v1",
      "fray.cad.artifact.v1"
    ],
    "supported_manifest_schema_versions": [
      "burr.design-data.v1",
      "fray.cad.artifact.v1"
    ],
    "supported_rulepack_schema_versions": [
      "burr.rulepack.v1"
    ]
  },
  "rulepack_id": "actuator_mount",
  "rulepack_version": "0.14.0",
  "schema_version": "burr.receipt.v1",
  "source_design_data": "examples/gallery/shaft-bearing-bracket/burr-design-data.json",
  "source_manifest": "examples/gallery/shaft-bearing-bracket/burr-design-data.json",
  "status": "pass",
  "summary": {
    "checks": 15,
    "failures": 0,
    "features": {
      "checked": 3,
      "checked_feature_ids": [
        "bearing_608_primary",
        "m3_loaded_mount_left",
        "m3_loaded_mount_right"
      ],
      "declared": 5,
      "intent_counts": {
        "cosmetic": 1,
        "fluid_or_air_path": 1,
        "mechanical_interface": 3
      },
      "step_candidate_cylinders_considered": 5,
      "unchecked": 2,
      "unchecked_feature_ids": [
        "cosmetic_relief_recess",
        "wire_passage"
      ]
    },
    "warnings": 13
  },
  "warnings": [
    {
      "message": "No applicable features were found for this rule.",
      "reason": "no_applicable_features",
      "rule_id": "actuator_mount:mechanical_slot_edge_distance",
      "status": "warn"
    },
    {
      "message": "No applicable features were found for this rule.",
      "reason": "no_applicable_features",
      "rule_id": "actuator_mount:counterbore_edge_distance",
      "status": "warn"
    },
    {
      "message": "No applicable features were found for this rule.",
      "reason": "no_applicable_features",
      "rule_id": "actuator_mount:bearing_seat_edge_distance",
      "status": "warn"
    },
    {
      "message": "No applicable features were found for this rule.",
      "reason": "no_applicable_features",
      "rule_id": "actuator_mount:m3_standoff_boss_edge_distance",
      "status": "warn"
    },
    {
      "message": "No applicable features were found for this rule.",
      "reason": "no_applicable_features",
      "rule_id": "actuator_mount:heat_set_insert_pocket_edge_distance",
      "status": "warn"
    },
    {
      "message": "No applicable features were found for this rule.",
      "reason": "no_applicable_features",
      "rule_id": "actuator_mount:m3_bossed_mount_support_wall_thickness",
      "status": "warn"
    },
    {
      "message": "No applicable features were found for this rule.",
      "reason": "no_applicable_features",
      "rule_id": "actuator_mount:m3_insert_support_wall_thickness",
      "status": "warn"
    },
    {
      "message": "No applicable features were found for this rule.",
      "reason": "no_applicable_features",
      "rule_id": "actuator_mount:m3_insert_pocket_back_wall_thickness",
      "status": "warn"
    },
    {
      "message": "No applicable features were found for this rule.",
      "reason": "no_applicable_features",
      "rule_id": "actuator_mount:straight_slot_step_presence",
      "status": "warn"
    },
    {
      "message": "No applicable features were found for this rule.",
      "reason": "no_applicable_features",
      "rule_id": "actuator_mount:counterbore_step_presence",
      "status": "warn"
    },
    {
      "message": "No applicable features were found for this rule.",
      "reason": "no_applicable_features",
      "rule_id": "actuator_mount:heat_set_insert_pocket_step_presence",
      "status": "warn"
    },
    {
      "message": "No applicable features were found for this rule.",
      "reason": "no_applicable_features",
      "rule_id": "actuator_mount:m3_standoff_boss_step_presence",
      "status": "warn"
    },
    {
      "message": "No applicable features were found for this rule.",
      "reason": "no_applicable_features",
      "rule_id": "actuator_mount:m3_standoff_boss_support_link",
      "status": "warn"
    }
  ]
}