Burr proof receipt

Edge-Safe Insert Pocket

This page shows the cached Burr release proof. The preview is visual context; the trust signal is the receipt checks and measured facts below.

pass

fraylabs/burr@burr-v0.29.0

Edge-Safe Insert Pocket generated STEP preview

3 checks

Feature proof checks

These checks are tied to declared mechanical features, including STEP-presence and manufacturability facts where available.

actuator_mount:heat_set_insert_pocket_edge_distance

m3_insert_pocket

Feature edge distance passes rule.

Reason: ok

Margin

3.70 mm

Measured

closest edge: object
feature shape: circle
source: parts[feature.part].bbox_mm minus feature envelope
wall to edge mm: 6.70

Required

center field: pocket_center_mm
diameter field: pocket_diameter_mm
length field: length_mm
min wall to edge mm: 3
span axis field: span_axis
width field: width_mm

actuator_mount:m3_insert_pocket_back_wall_thickness

m3_insert_pocket

Blind pocket back-wall thickness passes rule.

Reason: ok

Margin

12.30 mm

Measured

back face: object
back wall thickness mm: 14.30
bottom center mm: [-4.30, 0, 0]
bottom direction: [1, 0, 0]
pocket center mm: [-7.15, 0, 0]
source: parts[feature.part].bbox_mm minus bottom_center_mm

Required

min back wall thickness mm: 2

actuator_mount:heat_set_insert_pocket_step_presence

m3_insert_pocket

Declared heat-set insert pocket cylinder and bottom-plane geometry exists in the STEP artifact.

Reason: ok

Measured

artifact path: insert-pocket-edge.step
best bottom plane distance mm: 0
best bottom plane normal dot: 1
best pocket axial distance mm: 2.85
best pocket axis dot: 1
best pocket centerline distance mm: 0
best pocket diameter delta mm: 0
candidate cylinders: 1
candidate planes: 7
matched pocket bottom plane: true
matched pocket cylinder: true

Required

axis: [1, 0, 0]
axis dot min: 0.99
bottom center mm: [-4.30, 0, 0]
bottom plane tolerance mm: 0.25
center mm: [0, 0, 0]
centerline tolerance mm: 0.25
pocket axial tolerance mm: 3.35
pocket center mm: [-7.15, 0, 0]
pocket center tolerance mm: 0.50
pocket depth mm: 5.70
pocket diameter mm: 4.60
pocket diameter tolerance mm: 0.05

14 warnings

Non-applicable rules

actuator_mount:m3_loaded_hole_edge_distance

No applicable features were found for this rule.

Reason: no_applicable_features

actuator_mount:m3_clearance_hole_wall_thickness

No applicable features were found for this rule.

Reason: no_applicable_features

actuator_mount:mechanical_slot_edge_distance

No applicable features were found for this rule.

Reason: no_applicable_features

actuator_mount:counterbore_edge_distance

No applicable features were found for this rule.

Reason: no_applicable_features

actuator_mount:bearing_seat_edge_distance

No applicable features were found for this rule.

Reason: no_applicable_features

actuator_mount:m3_standoff_boss_edge_distance

No applicable features were found for this rule.

Reason: no_applicable_features

actuator_mount:m3_bossed_mount_support_wall_thickness

No applicable features were found for this rule.

Reason: no_applicable_features

actuator_mount:m3_insert_support_wall_thickness

No applicable features were found for this rule.

Reason: no_applicable_features

actuator_mount:m3_clearance_hole_step_presence

No applicable features were found for this rule.

Reason: no_applicable_features

actuator_mount:straight_slot_step_presence

No applicable features were found for this rule.

Reason: no_applicable_features

actuator_mount:counterbore_step_presence

No applicable features were found for this rule.

Reason: no_applicable_features

actuator_mount:bearing_seat_step_presence

No applicable features were found for this rule.

Reason: no_applicable_features

actuator_mount:m3_standoff_boss_step_presence

No applicable features were found for this rule.

Reason: no_applicable_features

actuator_mount:m3_standoff_boss_support_link

No applicable features were found for this rule.

Reason: no_applicable_features

8 checks

Receipt integrity checks

These checks prove the receipt was produced against known files and supported schemas.

burr_design_data:schema_version_supported

receipt

Design data schema version is supported.

Reason: ok

Measured

schema version: burr.design-data.v1

burr_rulepack:schema_version_supported

receipt

Rulepack schema version is supported.

Reason: ok

Measured

schema version: burr.rulepack.v1

burr_design_data:source_file_exists

design.py

File ref path exists.

Reason: ok

burr_design_data:source_sha256_matches

design.py

File hash matches design data.

Reason: ok

Measured

sha256: a75ca26d7a02ca2c1041379c32c4fd9c1a16a12d86dec16fd0acfbbb05e56030

Required

sha256: a75ca26d7a02ca2c1041379c32c4fd9c1a16a12d86dec16fd0acfbbb05e56030

burr_design_data:source_file_exists

design.py

File ref path exists.

Reason: ok

burr_design_data:source_sha256_matches

design.py

File hash matches design data.

Reason: ok

Measured

sha256: a75ca26d7a02ca2c1041379c32c4fd9c1a16a12d86dec16fd0acfbbb05e56030

Required

sha256: a75ca26d7a02ca2c1041379c32c4fd9c1a16a12d86dec16fd0acfbbb05e56030

burr_design_data:artifact_file_exists

insert-pocket-edge.step

File ref path exists.

Reason: ok

burr_design_data:artifact_sha256_matches

insert-pocket-edge.step

File hash matches design data.

Reason: ok

Measured

sha256: a38251a7062b46870e48ac2ab6f07cef22d9aadca71c7b32ea3a30bc54055f3a

Required

sha256: a38251a7062b46870e48ac2ab6f07cef22d9aadca71c7b32ea3a30bc54055f3a