Burr proof receipt

Electronics Standoff Deck

This page shows the cached Burr release proof. The preview is visual context; the trust signal is the receipt checks and measured facts below.

pass

fraylabs/burr@burr-v0.29.0

Electronics Standoff Deck generated STEP preview

12 checks

Feature proof checks

These checks are tied to declared mechanical features, including STEP-presence and manufacturability facts where available.

actuator_mount:m3_loaded_hole_edge_distance

m3_base_mount_left

Hole edge distance passes rule.

Reason: ok

Margin

2.80 mm

Measured

center to edge mm: 13
hole diameter mm: 3.40
source: parts[feature.part].bbox_mm nearest free edge
wall to edge mm: 11.30

Required

center to edge diameter multiple: 3
center to edge mm: 10.20
wall to edge mm: 8.50

actuator_mount:m3_loaded_hole_edge_distance

m3_base_mount_right

Hole edge distance passes rule.

Reason: ok

Margin

2.80 mm

Measured

center to edge mm: 13
hole diameter mm: 3.40
source: parts[feature.part].bbox_mm nearest free edge
wall to edge mm: 11.30

Required

center to edge diameter multiple: 3
center to edge mm: 10.20
wall to edge mm: 8.50

actuator_mount:m3_clearance_hole_wall_thickness

m3_base_mount_left

Hole wall thickness passes rule.

Reason: ok

Margin

9.30 mm

Measured

center to edge mm: 13
hole diameter mm: 3.40
source: parts[feature.part].bbox_mm nearest free edge
wall thickness mm: 11.30

Required

wall thickness mm: 2

actuator_mount:m3_clearance_hole_wall_thickness

m3_base_mount_right

Hole wall thickness passes rule.

Reason: ok

Margin

9.30 mm

Measured

center to edge mm: 13
hole diameter mm: 3.40
source: parts[feature.part].bbox_mm nearest free edge
wall thickness mm: 11.30

Required

wall thickness mm: 2

actuator_mount:heat_set_insert_pocket_edge_distance

m3_insert_socket_left

Feature edge distance passes rule.

Reason: ok

Margin

4.65 mm

Measured

closest edge: object
feature shape: circle
source: parts[feature.part].bbox_mm minus feature envelope
wall to edge mm: 7.65

Required

center field: pocket_center_mm
diameter field: pocket_diameter_mm
length field: length_mm
min wall to edge mm: 3
span axis field: span_axis
width field: width_mm

actuator_mount:heat_set_insert_pocket_edge_distance

m3_insert_socket_right

Feature edge distance passes rule.

Reason: ok

Margin

4.65 mm

Measured

closest edge: object
feature shape: circle
source: parts[feature.part].bbox_mm minus feature envelope
wall to edge mm: 7.65

Required

center field: pocket_center_mm
diameter field: pocket_diameter_mm
length field: length_mm
min wall to edge mm: 3
span axis field: span_axis
width field: width_mm

actuator_mount:m3_insert_pocket_back_wall_thickness

m3_insert_socket_left

Blind pocket back-wall thickness passes rule.

Reason: ok

Margin

13 mm

Measured

back face: object
back wall thickness mm: 15
bottom center mm: [-5, -22, 7]
bottom direction: [1, 0, 0]
pocket center mm: [-7.50, -22, 7]
source: parts[feature.part].bbox_mm minus bottom_center_mm

Required

min back wall thickness mm: 2

actuator_mount:m3_insert_pocket_back_wall_thickness

m3_insert_socket_right

Blind pocket back-wall thickness passes rule.

Reason: ok

Margin

13 mm

Measured

back face: object
back wall thickness mm: 15
bottom center mm: [-5, 22, 7]
bottom direction: [1, 0, 0]
pocket center mm: [-7.50, 22, 7]
source: parts[feature.part].bbox_mm minus bottom_center_mm

Required

min back wall thickness mm: 2

actuator_mount:m3_clearance_hole_step_presence

m3_base_mount_left

Declared clearance-hole geometry exists in the STEP artifact.

Reason: ok

Measured

artifact path: electronics-standoff-deck.step
axis dot: 1
candidate cylinders: 5
centerline distance mm: 0
diameter delta mm: 0

Required

axis dot min: 0.99
centerline tolerance mm: 0.25
diameter tolerance mm: 0.05

actuator_mount:m3_clearance_hole_step_presence

m3_base_mount_right

Declared clearance-hole geometry exists in the STEP artifact.

Reason: ok

Measured

artifact path: electronics-standoff-deck.step
axis dot: 1
candidate cylinders: 5
centerline distance mm: 0
diameter delta mm: 0

Required

axis dot min: 0.99
centerline tolerance mm: 0.25
diameter tolerance mm: 0.05

actuator_mount:heat_set_insert_pocket_step_presence

m3_insert_socket_left

Declared heat-set insert pocket cylinder and bottom-plane geometry exists in the STEP artifact.

Reason: ok

Measured

artifact path: electronics-standoff-deck.step
best bottom plane distance mm: 0
best bottom plane normal dot: 1
best pocket axial distance mm: 2.50
best pocket axis dot: 1
best pocket centerline distance mm: 0
best pocket diameter delta mm: 0
candidate cylinders: 5
candidate planes: 9
matched pocket bottom plane: true
matched pocket cylinder: true

Required

axis: [1, 0, 0]
axis dot min: 0.99
bottom center mm: [-5, -22, 7]
bottom plane tolerance mm: 0.25
center mm: [0, -22, 7]
centerline tolerance mm: 0.25
pocket axial tolerance mm: 3
pocket center mm: [-7.50, -22, 7]
pocket center tolerance mm: 0.50
pocket depth mm: 5
pocket diameter mm: 4.70
pocket diameter tolerance mm: 0.05

actuator_mount:heat_set_insert_pocket_step_presence

m3_insert_socket_right

Declared heat-set insert pocket cylinder and bottom-plane geometry exists in the STEP artifact.

Reason: ok

Measured

artifact path: electronics-standoff-deck.step
best bottom plane distance mm: 0
best bottom plane normal dot: 1
best pocket axial distance mm: 2.50
best pocket axis dot: 1
best pocket centerline distance mm: 0
best pocket diameter delta mm: 0
candidate cylinders: 5
candidate planes: 9
matched pocket bottom plane: true
matched pocket cylinder: true

Required

axis: [1, 0, 0]
axis dot min: 0.99
bottom center mm: [-5, 22, 7]
bottom plane tolerance mm: 0.25
center mm: [0, 22, 7]
centerline tolerance mm: 0.25
pocket axial tolerance mm: 3
pocket center mm: [-7.50, 22, 7]
pocket center tolerance mm: 0.50
pocket depth mm: 5
pocket diameter mm: 4.70
pocket diameter tolerance mm: 0.05

11 warnings